The optimization of load relief groove makes the force applied to the rod threads more uniform, ensures long service life of the tie rod.

The fully oil-cooled two-headed motor-driven servo system is the quintessence of highly-integrated servo pump system. It eliminates the influence of instability in machine operation due to the work environment and further reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.

With the use of durable ceramic heater bands and adaptive PID control performed by the Austrian controller. temperature control accuracy is up to ±0.5℃.

With special technical treatment, tie bars are highly-rigid and resistant to wear and corrosion. Uniformity of stress distributed on tie bar threads is over 99% without unbalanced force, bringing durability.

1. Including Inovance controller, servo drive and high-response motor.
2. Communication between the controller and the drive upgrades to digital type. Same brand controller and drive show better performance, faster and more accurate.
3. Quick and stable mold opening, smooth mold closing with no impact, less wear and tear to machine.
4. Mold opening repeatability is within ±0.5mm, with overshoot less than 2.0mm.
5. Deviation of injection end position is less than 0.25mm.
6. Deviation of material feeding position is less than 0.2mm.
7. Temperature overshoot of first-time heating is less than 3℃, within ± 1℃.

1. The upgraded clamping unit can provide larger clamping force, better facilitating the molding of thin-wall and deep-cavity products.
2. Platen, tie bars and machine frame of better mechanical properties can better improve the rigidity of the whole machine and reduce deformation.
3. The rigidity of overall mold locking is increased by more than 25%.

1. The plasticizing is synchronized with the cooling, mold opening and part picking, shorter cycle time.
2. PAC380K3 and above model are generally equipped with hydraulic synchronous plasticizing function, which shortens the product molding cycle.

(1) To achieve the molding of larger two-color products.
(2) To improve overall productivity and efficiency.
(3) To achieve special process application.

(1) The fixed mold adopts a long waist-shaped locating ring, which allows simultaneous injection at the work station of any size as required.
(2) When not for multi-component injection, any injection unit can be used as main injection unit.
(3) Any independent injection unit can be added on the non-operating side or add two injection units on the basis of two injection units.

(1) The turntable rotation with mold to realize the molding of multi-color and multi-component products.
(2) In addition to the standard 0° and 180° turntable stations, the turntable can be set at any angle according to the mold design to realize the diversified customization of products.
(3) Adopt servo motor and reducer to drive the turntable with pin positioning, to ensure high rotation accuracy of ±0.05°.