Incorporating cutting-edge German technology and built on years of hands-on application expertise, the YIZUMI Advanced Series embarks on a groundbreaking journey in the realm of large-tonnage two-platen injection molding machines. Driven by innovation and a pioneering spirit, we seek to set a benchmark in this transformative endeavor. Available with clamping forces from 5,500 to 40,000 kN.
≤3% Smaller variation of force on tie bar

55% Shorter dry cycle

≤3‰ Outstanding injection stability

Machine Introduction Video

Machine Introduction Video
Clamping Unit
Impact-proof synchronized lock nut mechanism
Impact-cushioning synchronized lock nut closing is fast and more reliable with low noise.
Independent high-pressure cylinder
Mold opening under high pressure for standard. Large opening force can solve molding problems of deep-cavity products or car lights which are strongly coated on mold or have difficulty in mold opening.
Highly-rigid accurate guide device
Long movable platen supports and L-shape guide rails on machine frame facilitate high load-bearing, guide capacity, and anti-roll adjustment.
Injection Unit
Non-contacted ultrasonic displacement sensor
Ultrasonic displacement sensor for position measurement is characterized by absolute value, little signal interference, long service life and high accuracy of measurement.
Adaptive PID temperature control
With the use of durable ceramic heater bands and adaptive PID control performed by the Austrian controller, temperature control accuracy is up to ±0.5℃.
Excellent injection performance
Repeatability of injection end position up to ±0.2mm and repeatability of part weight ≤3‰ meet the needs of increasing efficiency and lowering costs.
Servo system driven by fully oil-cooled two-headed motor
The fully oil-cooled two-headed motor-driven servo system is the quintessence of highly-integrated servo pump
system. It eliminates the influence of instability in machine operation due to the work environment and further reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.
European KEBA Controller
Memory of alarm and process parameter change, USB expansion without limit
Programming with no restrictions, record of process parameter change curve is available
Production process data control (PDP) and statistical process control (SPC)
New processes like MuCell, ICM, IMC can be integrated
Relevant Recommendation
Relevant Products
Relevant Technologies

DP Series Two-platen Injection Molding Machine

Specialize in large precision parts manufacture

Two-platen Multi-component Injection Molding Machine

Innovative Manufacturer of high-end multi-component injection molding

PAC-K3 Series High-speed Injection Molding Machine

To upgrade equipment power, injection rate, precision and energy consumption to further improve injection stability.

Uniform stress distribution control technology of tie bars

With special technical treatment, tie bars are highly-rigid and resistant to wear and corrosion. Uniformity of stress distributed on tie bar threads is over 99% without unbalanced force, bringing durability.

Adaptive PID temperature control technology

With the use of durable ceramic heater bands and adaptive PID control performed by the Austrian controller. temperature control accuracy is up to ±0.5℃.

Fully oil-cooled two-headed motor-driven servo control technology

The fully oil-cooled two-headed motor-driven servo system is the quintessence of highly-integrated servo pump system. It eliminates the influence of instability in machine operation due to the work environment and further reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.

Service Process

01
Process/Mold Analyse and Design
  • Raw materials selection
  • Product design
  • Mold flow analysis
  • Mold design suggestion
02
Equipment Selection Suggestions
  • Product performance
  • Product quality
  • Ease of use
  • Safety requirements
03
Whole Plant Planning Advice
  • Planning of production line
  • Arrangements for people, machines, and materials according to process flow
  • Peripheral automation
  • Smart connection
04
Delivery Solutions
  • Professional installation and debugging
  • On-site operation training
  • Molding process training
05
After Sales Solutions
  • YFO services
  • Preventive maintenance
  • Device upgrade

Download

Contact Us
Please leave your message, and we will contact you soon!
Verification code
I hereby give my consent for my personal data, collected and processed by YIZUMI in relation to my inquiry.
Please contact us