The A6-EU series injection molding machine integrates advanced intelligent R&D innovations, energy-efficient technologies, and precision-engineered components. Designed to deliver higher precision, greater stability, and improved energy efficiency, the A6-EU series represents the next generation of injection molding solutions for global manufacturers, with clamping forces ranging from 600-7,000 kN.
More precise
Dual pressure-center platens cut platen deformation by 10% to 25% for higher molding accuracy.
More stable
Closed-loop oil temperature control holds ±0.5°C accuracy across 12.5-hour operation.
More energy efficient
Fully enclosed aerogel insulation cuts energy loss, with 24-hour energy consumption statistics.
Machine Introduction Video
Machine Introduction Video
Injection Unit
Fully enclosed aerogel insulation device
A6-EU series introduces an upgraded insulation system with a fully enclosed design and optimized structure, utilizing aerogel material with exceptional thermal insulation capabilities.
This upgrade extends the longevity and significantly improves energy efficiency.
New low-shear high-mixing plasticizing components
A6-EU series is equipped with new low-shear high-mixing plasticizing components as standard, greatly enhancing wear resistance.
The screw is designed with simulation technology to optimize plasticizing performance.
The structure optimization of screw tip, check ring and screw washer ensures higher injection weight repeatability. Energy-efficient and high-performance screw and barrel components utilizes ceramic heater band for efficient and stable heating.
Control System
Intelligent clamping force management system
A6-EU series is equipped with intelligent clamping force management system, YIZUMI's advanced intelligent R&D innovation.
Intelligent clamping force management system proactively identifies and sets optimal clamping force, monitors and intelligently optimizes clamping force parameters, enabling users to efficiently and conveniently operate the injection molding machine while improving the stability of product molding quality.
Standard functions of intelligent clamping force management system: Clamping force monitoring, Intelligent clamping force sustaining, Pre-releasing of clamping force.
Intelligent energy management system
A6-EU series is equipped with intelligent energy management system, enabling energy consumption data to be digitized and visualized. 24-hour energy consumption and production statistics.
Energy consumption data of the mold is visually represented in real-time curves, serving as a reference for energy-saving and parameter optimization.
Users can input the electricity unit price for online measurement and display of energy cost for each product.
Dual pressure-center platens
A6-EU series has introduced a new upgrade with dual pressure-center platens, both fixed and movable platens utilizing YIZUMI's patented pressure-center structure. This design, optimized through simulation, provides excellent rigidity, reduces deformation, and supports better product molding.
- Increased molding precision: optimized design decreases overall deformation of fixed and movable platens by 10% to 25%, resulting in reduced stress on platens during clamping and significantly less cavity deformation.
- Improved utilization of clamping force: effectively addresses problems like flash and low product high-strength, low-deformation structure to employ a lower clamping force for stable clamping.
- Extended service life of mold and equipment: enhanced strength, lightweight structure, and reduced clamping force minimizes wear on molds and machines, resulting in less maintenance and longer service life.
With the "Intelligent clamping force optimization" function, the optimal clamping force can be sustained to make operation more effortless, reliable, and stable.
Layout of the ejector holes on movable platen is adjusted according to EUROMAP 2. Mold locating holes on movable platen and fixed platen are designed according to EUROMAP 2.
Closed-loop oil temperature control
Independent closed-loop oil temperature control function offers improved system stability.
This function ensures precise control over the hydraulic oil temperature, achieving an accuracy of ±0.5°C.
12.5-hour oil temperature variation (set at 46.5°C), maintaining consistent temperature over extended operation.
Integral dual-layer support for injection unit
A6 series features integral dual-layer support for the injection unit as a standard configuration, with dual linear guides for both carriage and injection.
- Lower resistance in the injection process improves energy efficiency; faster response, more accurate control.
- Oil-free self-lubricating linear guides, over 800 km of lubrication, improving machine cleanliness and ease of maintenance.
Fully enclosed aerogel insulation device
- The A6 series introduces an upgraded insulation system with a fully enclosed design and optimized structure, utilizing aerogel material with exceptional thermal insulation capabilities. This upgrade extends the longevity and significantly improves energy efficiency.
- In tests on the UN160A6 model, a fully enclosed aerogel insulation device (standard feature) maintains a constant temperature of 240°C for one hour, achieving about 40% energy saving compared to conventional insulation systems
High-mixing dual-alloy plasticizing components for all models
- A6 series is equipped with high-mixing dual-alloy plasticizing components as standard, greatly enhancing wear resistance.
- The screw is designed with simulation technology to optimize plasticizing performance.
- The structure optimization of screw head, check ring and screw washer ensures higher injection weight repeatability.
New energy-efficient hydraulic system
A6 series is equipped with a new energy-efficient hydraulic system, achieving an average energy saving of over 12%.
- The newly optimized hydraulic manifold channels and pipelines reduce pressure loss and minimize energy consumption.
- By using new low-viscosity, anti-wear hydraulic oil, the system delivers over 10% energy savings in the dry cycle test.
Intelligent weight V/P control
- Intelligent weight V/P control function, YIZUMI’s core R&D achievement for all models, achieves product weight repeatability of 2 ‰.
- In the production process, the controller monitors the pressure variations of plasticizing and uses algorithms to automatically adjust the holding pressure switchover point or the holding pressure, ensuring precise repeatability of product weight.
- Holding pressure switchover control of consistent shot weight: For molds with short holding time, holding pressure switchover control with consistent shot weight performs better.
- Holding pressure control of consistent compression of melting material: For molds with longer holding times, holding pressure control of consistent compression of melting material provides superior performance.
SKⅢ Series General Purpose Injection Molding Machine
SKIII precision servo injection molding machine covers 500-10,000 kN. Its centrally supported, high-rigidity platen distributes clamp force evenly to limit mold deformation and improve molding accuracy reliably.
Linear guides support precision injection and efficient plasticizing. Built-in water circuits improve cooling by over 100%, while energy-saving servo control cuts pressure loss, power use and operating noise levels.
T-M SERIES Hydraulic Medical Injection Molding Machine
The T-M Series hydraulic injection molding machine is purpose-built for the medical industry, delivering higher efficiency, higher cleanliness, and low-cost cleanroom production. With improved injection speed, enhanced plasticizing efficiency, and a stable tie-bar-free structure, the T-M Series provides a reliable and clean molding solution for medical consumables such as syringe barrels, rigid needle hubs, and respiratory masks with clamping forces ranging from 1,600-3,200 kN.
TP5 Series Precision Energy-Saving Injection Molding Machine
Building on a decade of A5's success, TP5 series (Toggle-Professional 5) debuts with a fresh new look and enhanced performance, marking the beginning of YIZUMI's new era of professional three-platen injection molding machines. With YIZUMI's "IPD2.0" development process, TP5 series delivers 8%-25% faster dry cycles, intelligent clamping force management, and energy-efficient hydraulic systems, with clamping forces ranging from 900-28,000 kN.
Next-Gen A6 Series Advanced And Intelligent Injection Molding Machine
With the global trend towards intelligent and high-end manufacturing, YIZUMI is driving the industry forward with its solid technical expertise.
Combining years of experience and innovation, YIZUMI A6 series is launched, the sixth-generation advanced and intelligent injection molding machine.
A6 series, with its unique advantages of intelligence, precision, sustainability, and efficiency, provides you with superior injection molding solutions, with clamping forces ranging from 900-18,500 kN.
Optimized clamping unit
1. The upgraded clamping unit can provide larger clamping force, better facilitating the molding of thin-wall and deep-cavity products.
2. Platen, tie bars and machine frame of better mechanical properties can better improve the rigidity of the whole machine and reduce deformation.
3. The rigidity of overall mold locking is increased by more than 25%.
Surface Planeness Testing
YIZUMI robot automation solutions for plastics injection molding offer rapid, accurate surface planeness testing, improving production precision and efficiency.
Service Process
01
Process/Mold Analyse and Design
Raw materials selection
Product design
Mold flow analysis
Mold design suggestion
02
Equipment Selection Suggestions
Product performance
Product quality
Ease of use
Safety requirements
03
Whole Plant Planning Advice
Planning of production line
Arrangements for people, machines, and materials according to process flow